11 Ways To Destroy Your Repair Patio Door Lock
How to Repair a Bad Patio Door Lock
A safe patio door is an essential part of home security. If it is difficult to lock, it could be a hassle.
A locked that isn't working properly could be the result of misalignment or even wear and wear and tear. It may be possible to restore the lock's function by adjusting or lubricating the lock. If these solutions fail, you may need to replace both the mortise as well as the handle.
Clean and Lubricate
Over time, dust, dirt and grime can make it difficult to open or close the door lock. Regular cleaning and lubrication routine will keep your security device from becoming stiff or stuck, saving you money on repair bills and allowing your door to reach its maximum lifespan.
In the beginning, you'll have to clean the lock's the cylinder. To do this, use spray cans of penetrating oil such as WD-40. Spray a small amount oil into the keyhole and then turn the key to distribute the oil. Avoid using household solvents or other oils which could harm your locks. Make sure you spray some on the key itself as well.
After cleaning your lock cylinder, it's time to lubricate. You can apply an oil spray made of silicone or a dry lubricant such as graphite powder. Graphite powder has a long life and doesn't attract dust as liquid lubricants do, which is why it's an excellent choice to lubricate locks that are sticky. Silicone sprays are water-resistant and can withstand moist and freezing temperatures, however it may require several coats to be effective.
You can also use a de-icer spray, which is specifically specially designed for cold weather. It will remove ice and frost on the mechanism of your lock. Repair My Windows And Doors of this will allow your lock unlock and then lock again easily.
How often you need to oil your locks will be contingent on the environmental conditions. The location of your door will affect its performance. A location near the coast could expose the door to salty air, which could cause corrosion. It is recommended to lubricate locks at least two times a year or more often in areas with harsh weather conditions. Lubricating your locks will save you money on repairs and ensure your patio door will function properly for the years to come.
Reposition the Lock Cylinder
If your patio door lock doesn't perform as it should it could be because one or more of its components may be damaged or misaligned. Regular inspection and timely repair of a defective patio door lock can prevent any further damage and ensure your doors are safe. You can repair the patio door that is locked or locked by tightening loose screws, adjusting the lock mechanism, or replacing the lock cylinder.
Begin by inspecting the exterior and interior of the lock to find signs of damage or misalignment. The patio door locks can expand or contract in response to the weather and might even shift with time. This slight shift can cause the locking mechanisms to not align properly and cause problems when opening or closing the door.
Examine the keyway hole of the lock cylinder. A corroded or blocked cylinder is difficult to open and may eventually cause damage to the pins, cams, or latch springs. If the cylinder isn't fitting easily, you can remove any obstructions using a pair tweezers and a lock. If the issue continues, you may have to remove the cylinder in order to locate the root of the issue.
If the lock cylinder hasn't been secured to the lock body and is loose, it can be loosened by unscrewing the screw on the faceplate of cylinder. This screw lets you rotate the cylinder, and may even help restore the alignment.
Examine the cylinder for a small tab that can move up and down using the key, usually towards the end. This little clip, called a "release tab" is what keeps the cylinder from sliding all the way into the lock body. The tab can be removed by using a standard key. This will allow the cylinder to be removed, then it can be inserted.
If your lock's cylinder is stuck, you may be able to restore the proper alignment by rotating it until the latch bolt engages with the strike plate, and the handle or knob can be pushed into and pulled out. Once you've restored the proper alignment, you can reassemble the lock and check its performance. If your patio door lock still isn't working properly, it is likely that another component like the latch or latch spring needs to be replaced.
Lock the Screws
Over time, frequent use, hot and cold weather dust, dirt, and can take their toll on patio door locks. These delicate parts can be damaged if they are not maintained properly, causing your door to stop locking properly. Fortunately, most lock issues can be easily fixed with a few simple maintenance steps.
The first thing you have to do is clean the lock mechanism. Make use of a damp cloth to get rid of any dust or dirt that may be present, and dry the components thoroughly. After cleaning the components, a small amount silicone-based lubricant will help keep the moving parts operating smoothly and efficiently. Avoid lubricants containing oil bases, however, as these can attract dust and debris that can lead to further problems.
If your patio door comes with an electronic footlock for security, make sure that the footlock is aligned properly with the strike plate. In most cases this will only require you to adjust the screws that attach your foot lock to the frame of the patio door. To adjust the footlock, loosen the screw with the help of a Robertson screwdriver and gently pull it up or down. After the adjustment is completed then tighten the screw.
The most frequent issue when it comes to repairing patio door handles is the misalignment of the strike plate and latch. This could be caused by wear and tear, or the latch may be positioned higher or below what it should be.
Then, take off the handle that was previously used and locate the screws or bolts that hold it in place. Keep in mind the screws or bolts, because you will need them for the installation of the new handle. Then, remove the old spindle and place the new one on the inside of the door. Make sure that it is aligned properly with the holes in both the interior and exterior handle. Once the new spindle is installed, reinstall the handles for both exterior and interior and ensure that they are in alignment with the bolts or screws that secure them.
Close and secure the patio door after you have made any adjustments that are required. If everything is in alignment, the door will be able to open and close smoothly, without any additional force. If you're still experiencing difficulty then you may need to reposition the strike plate or latch or the lock cylinder may be damaged and must be replaced.
Replace the latch
If your patio door locks still not working, it might be time to replace the lock. Replacing a lock is a relatively simple home improvement task that many homeowners can complete themselves. Begin by sliding the patio doors completely out and unscrewing your existing lock from the inside of the door. Be sure to study the way in which the current lock is screwed into both the door and the door jamb to determine the kind of lock you'll have to purchase.
Before installing the new latch take off the screws that secure the strike plate (the part of the lock that's positioned on the outside of the door frame) and then adjust it horizontally or vertically to align it with the latch hole in the jamb in the door. After you've adjusted the latch plate you can tighten the screws, then screw it in place.
When all the components of your patio door are relocated or replaced, reassemble and secure them as instructed by the manufacturer. After you're done, test the latch to ensure that it fits and is able to catch the latch's hasp when the door is closed. If it does the lock will be able to latch onto the door. If it does, your patio door lock is now functioning exactly as it should, and is able to provide you with the security and privacy you've come expect from your home's doors.
Like other components of your home, need to be aligned properly to work effectively. Over time, temperature or cold, dirt and debris could cause the frames and hinges to shift. The wrongly aligned hinges, door frames, and locking mechanisms are similar to trying to put keys in the wrong keyhole. It's not working. You can fix the issue that seemed to be impossible by following these easy steps. So, give yourself an ovation for tackling this challenge and reclaiming your patio door's locked position! We're betting you won't face any more trouble opening or closing the door from here on. Good luck! We are here to assist in case you require any assistance or have any questions.